Product Name: NMP solvent recovery machine Model: NMP solvent recovery machine Lithium secondary manufacturing process, from the coating machine
to the atmospheric emissions contain a large number of NMP solvent (N-methyl pyrrolidone) of the gas (temperature 100 100 Concentration 1500PPM, containing solvent 5.1g 5.1g /kg) kg), both caused by environmental pollution and waste caused by organic
solvents, the use of our technology development in Japan of the
coating machine dedicated organic solvents (NMP solvent) solvent recovery recycling machine includes two parts and
waste heat recovery can be achieved NMP solvent recovery and conservation coating machine the purpose of
heating power. Uses: 1, solvent recovery efficiency of 95 percent, saving 70% thermal efficiency. For example: the wind to deal with the volume of 10,000, the LH-1350N-10000 solvent modular units (including heat recovery units), solvent recovery 46kg 46kg /h 187kw/h/ h, saving energy 187kw / h, solvent recovery plus a year to save energy value of two million yuan (10,000 yuan by the recovery of solvents / tons, electricity 0.7 yuan / operator). 2, solvent recovery after treatment, the gas content in the organic
solvent can be below 40ppm, fully meet the requirements of ISO14000. 3, coating machine in the air to take closed-cycle, environmental
temperature, humidity and air quality impact of reducing the
quality of the coating. Principle: Solvent recovery - using frozen - adsorption enrichment technology recovery wheel emissions of
organic solvents, organic solvent recovery was more than 95%: As the exhaust air flow coating machine, and the concentration of low production NICHIAS Japanese runner VOC concentration the emission of organic solvent concentration
reaches a certain concentration, followed by condensation recovery,
lower cost recovery. Waste heat recovery - energy-saving technology enables the use of high-performance
coating machine to reduce energy consumption 70 percent: the process of coating a large number of gas discharge, the
temperature generally 110C 110C And at the same time a large number of fresh air added to the
coating machine. I take the sensible heat exchange of advanced heat transfer
technology wheel of the exhaust and added to the coating machine to
heat the fresh air exchange, so that added to the coating machine
to the air preheater 84.5C 84.5C Around, so that the heating coating machine dropped to about 70% of energy, to enter the table at the same time the air temperature
to cold 50.5C 50.5C . Guest: Sony batteries in Wuxi, Wuxi Hitachi batteries, battery Triglobal
Changzhou, Suzhou Star Constant Power Co., Ltd., Shenzhen BAK Battery, Shenzhen Trade and battery days, Zhuhai
Great batteries. Selection Method: 1, the use of NMP coating quantity of the |
